The valves on the heating pipes should not be turned on and off at will. If the heating system is operated for the first time, it generally needs to be debugged.
Specific operation method:
1. Adjust the position, and adjust the valve of each riser to the appropriate position.
2. Open the manual air release valve of each radiator to exhaust the air accumulated in the radiator, or open the exhaust valve of the air collecting tank installed on the top of the system to exhaust until each radiator is hot , the debugging is completed. Once the debugging is completed, the valve should be fixed and cannot be opened and closed at will.
3. When opening the valve, turn the handwheel clockwise, when closing the valve, turn the handwheel counterclockwise, and rotate it in place according to the opening and closing indicators. The position of the radiator cannot be changed arbitrarily, nor can water be released from the system at will. If the hot water is lost, the water temperature in the pipe network will drop rapidly, resulting in a decrease in the indoor temperature.
4. If the valve is found to be faulty, stop using it immediately, find out the cause and clear the fault.
